Contact Us

contact info

Our News

Under Engicon O&M/DWA Regional Training Program, Engicon O&M is pleased to announce the 5th   training course for 2016 in association with the German Association for Water, Wastewater and Solid Waste (DWA), entitled:

“Water and Sludge Reuse Management ”

Fromthe 17th  to the  20th  April   2016

Amman, Jordan

Courses Objectives:

The training course aims to promote the beneficial and safe Water and Sludge Reuse through equipping the participants with ultimate account of the latest water and sludge reuse management theory and practice.

Target group:

  • Decision Makers
  • Projects Planners
  • Wastewater Utilities Managers
  • Water and Wastewater Engineers
  • Environmental Managers and Engineers
  • Agricultural Engineers and Researchers

Venue:Engicon O&M Training Centre, Amman, Jordan.

Training course fees are as listed below

Number of participants

Fees (USD)

1st participant

USD 950

10% Disc. for the 2ndparticipant

USD 855

17% Disc. for the 3rdparticipant & above

USD 788

Training fees include (5 days training, training material, daily lunches and coffee breaks, site visits and issuing certificates).

Interested applicants are kindly requested to fill out the attached application form, print it, sign it, and send it toThis email address is being protected from spambots. You need JavaScript enabled to view it. by no later than9th April  2016.

Brochure

Application Form

Under Engicon O&M/DWA Regional Training Program, Engicon O&M is pleased to announce the 4th training course for 2016 in association with the German Association for Water, Wastewater and Solid Waste (DWA), entitled:

“Design, Installation, Operation & Maintenance Of Water Wells Training Course”

From 10th to 14th  April 2016

Amman, Jordan

Courses Objectives:

This training course aims at training the participants how to:

  • Design and drill a borehole.
  • Testing of the well
  • Select the right equipment such as pumping units, cables, generators, control panel and others.
  • Operate and maintain the submersible water pumps.
  • Overcome common daily problems.
  • Health and safety measures.

Furthermore the participants will be able to perform the required preventive maintenance in proper way. Never the less, the training designed to familiarize the participants with the main design aspects that help in the operation and maintenance of the water pumps.

Target group:

  • Engineers
  • Supervisors
  • Technicians 

Venue:Engicon O&M Training Centre, Amman, Jordan.

Training course fees are as listed below: 

Number of participants

Fees (USD)

1st participant

USD 850

10% Disc. for the 2ndparticipant

USD 765

17% Disc. for the 3rdparticipant & above

  USD 705.5

Training fees include (5 days training, training material, daily lunches and coffee breaks, site visits and issuing certificates).

Interested applicants are kindly requested to fill out the attached application form, print it, sign it, and send it toThis email address is being protected from spambots. You need JavaScript enabled to view it. by no later than 5th April 2016.

Brochure

Application Form

Under Engicon O&M/DWA Regional Training Program, Engicon O&M is pleased to announce the 8thtraining course for 2015 in association with the German Association for Water, Wastewater and Solid Waste (DWA), entitled:

“GIS for Water Utilities & The Role of GIS in NRW Management”

Fromthe 27th to 31th December   2015

Manama, Bahrain

Courses Objectives:

This training course aims to develop and strength the GIS skills of the water professionals in planning, design and implementation of water, wastewater and environmental projects.

Target group:

•Environmental project engineers and managers involved in the management of Water, and Wastewater Project.

•Water Utilities Personnel and Government Employees involved in GIS and Water Works .

Venue:Radisson Blu, Manama Bahrain

Training course fees for participation  

Number of participants

Fees (USD)

One participant

USD 2500

Training fees include (5 days training, training material, daily lunches and coffee breaks, site visits and issuing certificates).

Interested applicants are kindly requested to fill out the attached application form, print it, sign it, and send it to This email address is being protected from spambots. You need JavaScript enabled to view it. by no later thanDecember 20th  2015.

Application Form

Brochure

Under Engicon O&M/DWA Regional Training Program, Engicon O&M is pleased to announce the 7thtraining course for 2015 in association with the German Association for Water, Wastewater and Solid Waste (DWA), entitled:

“GIS for Water Utilities Advanced Level”

Fromthe 8th to the 12th of November  2015

Amman, Jordan

Courses Objectives:

This training course aims to develop and strength the GIS skills of the water professionals in planning, design and implementation of water, wastewater and environmental projects.

Target group:

•Environmental project engineers and managers involved in the management of Water, and Wastewater Project.

•Water Utilities Personnel and Government Employees involved in GIS and Water Works .

Venue:Engicon O&M Training Centre, Amman, Jordan.

Training course fees are as listed below: 

Number of participants

Fees (USD)

1st participant

USD 1000

10% Disc. for the 2ndparticipant

USD 900

17% Disc. for the 3rdparticipant & above

USD 830

Training fees include (5 days training, training material, daily lunches and coffee breaks, site visits and issuing certificates).

Interested applicants are kindly requested to fill out the attached application form, print it, sign it, and send it toThis email address is being protected from spambots. You need JavaScript enabled to view it. by no later thanNovember 1st, 2015.

Application Form

Course Outline

Under Engicon O&M/DWA Regional Training Program, Engicon O&M is pleased to announce the 6thtraining course in association with the German Association for Water, Wastewater and Solid Waste (DWA), entitled:

“Pollution Prevention and Environment Management Systems (EMS) ISO 14001”

Fromthe 25th to the 27th of August 2015

Amman, Jordan

Courses Objectives:

This course provides a comprehensive study of Environmental Management systems (EMS). It includes discussion on how to develop such a system for your entity in addition to how to plan and carry out an effective audit on these systems. The course also discusses pollution prevention and green indicators and how they can be integrated into an EMS.

Target group:

Environmental professionals, environmental managers, and other professionals interested in environmental management systems development, implementation, and auditing.

Venue:Engicon O&M Training Centre, Amman, Jordan.

Training course fees are as listed below: 

Number of participants

Fees (USD)

1st participant

USD 500

10% Disc. for the 2ndparticipant

USD 450

17% Disc. for the 3rdparticipant & above

USD 415

Training fees include (3 days training, training material, daily lunches and coffee breaks, site visits and issuing certificates).

Minimum number of participants to conduct the Training Course is 7 participants.

Interested applicants are kindly requested to fill out the attached application form, print it, sign it, and send it to This email address is being protected from spambots. You need JavaScript enabled to view it. by no later thanAugust 20th, 2015.

Application Form

EMS Training Outline

The challenge

The Water Authority of Jordan (WAJ) operates pumping stations across Jordan to distribute water to citizens. The current infrastructure used for water distribution requires a large amount of energy, and this has made WAJ the country’s largest energy consumer. This issue can be addressed by modernizing the pumping stations and implementing newer technologies, which can vastly improve not only energy efficiency, but also loss of water. This, in turn, reduces costs for WAJ.

Taking action

To improve the efficiency of water distribution in Jordan, a partnership was established between the public and private sector. WAJ and the German Federal Enterprise for International Cooperation (GIZ) approached a private consortium comprising Engicon and Wilo SE, and a performance management contract was then set up between Miyahuna and Engicon O&M to improve efficiency at the Wala and Lib pumping stations, which lie within the governorate of Madaba.

This initiative sought to reduce energy consumption and water losses at both pumping stations and provide better service to their customers over a five-and-a-half year period. The role of the private consortium was to finance, supply and install new pumps, valves and other accessories at the Wala and Lib pumping stations and to manage operation and maintenance of these stations. They would also provided training to staff on the new equipment and a more efficient operation process, in addition to developing O&M manuals for the pumping stations.

A more efficient water distribution system

New pumps and valves, produced by the German manufacturers Wilo and VAG, were introduced by the private consortium. A new SCADA system was also installed to monitor and log the data of all parameters in the pumping stations. The existing electrical panels, which had been old and run down, underwent full maintenance to improve their working order and reduce the risk of the pumps shutting down.

The new system was in place as of the 4th of January 2015, and there have already been significant energy savings. Initial results showed a 13% energy saving at the Wala pumping station and a 39% saving at the Lib pumping station. These figures are above the expected outcomes.

The second phase of the work, which will commence after March 2015, will entail renovating the pumping station building.

The following table illustrates a comparison among the previous, guaranteed, and current energy consumption (until the end of January 2015) at both the Wala and Lib pumping stations.

Pumping Station (PS)

Specific Energy Consumption at Baseline

Specific Energy Consumption at WAJ Target Efficiency

Achieved Specific Energy Consumption up to 31/01/2015

 

[kWh/m3]

[kWh/m3]

[kWh/m3]

Wala PS

1.02

0.90

0.89

Lib PS

1.1

0.82

0.71

Engicon O&M Announces Training Plan For 2015

Thursday, 06 August 2015 12:00

Engicon O&M is pleased to announce the launch of Engicon O&M - DWA Water Training Program 2015
The Water Training Program (WTP) is a specialized regional training program implemented by Engicon O&M in association with the German Association for water, wastewater and waste (DWA).
This program targets water engineers, planners and designers of water systems, along with supervisors, operators and mid-level managers in the water sector.
The objective of the training program is to improve the performance of the water utilities especially in the field of operation & maintenance, management of water systems, GIS applications, Non-Revenue Water Management, Solid and Hazardous Waste Management and ISO 14001. Furthermore, the water training program is designed to develop the planning and design skills of the water and wastewater engineers as well as the environmental specialists. Details of the program can be found here.

Under the Water Training Program 2015, Engicon O&M is pleased to announce the 5th training course in association with the German Association for Water, Wastewater and Solid Waste (DWA), titled:

“Planning and Design of Wastewater Treatment Plants”

From the 7th to the 11th of June 2015

Amman, Jordan

Courses Objectives:

This course provides the fundamentals for the selection and design of the most appropriate, cost-effective and sustainable wastewater or sanitation treatment system. Also, the training course aims at strengthen the planning and design skills of the wastewater engineers and to familiarize the wastewater engineers with the cost effective design procedures.

Target group:

The course is intended for wastewater and environment engineers, infrastructure planners and those who manage them.

Venue:Engicon O&M Training Centre, Amman, Jordan.

Training course fees are as listed below: 

Number of participants

Fees (USD)

1st participant

USD 920

10% Disc. for the 2nd participant

USD 828

17% Disc. for the 3rd participant & above

USD 764

Training fees include (5 days training, training material, daily lunches and coffee breaks, site visits and issuing certificates).

Minimum number of participants to conduct the Training Course is 7 participants.

Download Application Form

Download Training Agenda

Under the Water Training Program 2015, Engicon O&M is pleased to announce the 4th training course in association with the German Association for Water, Wastewater and Solid Waste (DWA), titled: “Water Loss Reduction” from 10-14 May 2015.

Courses Objectives:

This training course aims at training the participants on the latest technologies and equipment used in water leak detection as well as non-revenue water reduction approaches to enhance the financial and environmental sustainability of the water utilities. Also, this course aims at improving the operational and technical skills of the water leak detection technicians.

Target group:

  • Leak Detection Engineers and Technicians
  • O&M Engineers and Technicians
  • Supervisors of the technical staff

Venue: Engicon O&M Training Center, Amman, Jordan.

Training course fees are as listed below: 

Number of participants Fees (USD)
1st participant USD 950
10% Disc. for the 2nd participant USD 855
17% Disc. for the 3rd participant & above USD 788

Training fees include (5 days training, training material, daily lunches and coffee breaks, site visits and issuing certificates).

Minimum number of participants to conduct the Training Course is 7 participants.

Download Course outline

Please send your application forms via email:
To: This email address is being protected from spambots. You need JavaScript enabled to view it.
Cc: This email address is being protected from spambots. You need JavaScript enabled to view it.

Under the Water Training Program 2015, Engicon O&M is pleased to announce the 1st training course in Association with the German Association for Water, Wastewater and Waste (DWA), titled:

"Planning and Design of Water Distribution Networks"

Courses Objective:

This course aims at familiarizing the participants with all related aspects of planning and design of water networks including basic concepts and criteria, water quality standards, design considerations, computer modeling, kinds of materials used for pipes and fittings, ancillary structures, cost estimation, key considerations during implementation; costing and budgeting and operational considerations.

Target group:

The course is intended for civil engineers, water design engineers, planning and design engineering consulting companies, contractors and non-governmental organisations.

Venue: Engicon O&M Training Centre, Amman, Jordan.

Training course fees are as listed below:

Number of participants

Fees (USD)

1st participant

USD 900

10% Disc. for the 2nd participant

USD 810

15% Disc. for the 3rd participant & above

USD 765

Training fees include (5 days training, training material, daily lunches and coffee breaks, site visits and issuing certificates).

Minimum participants to conduct the Training Course is 5 participants.

Download Course Outline

Please send your application via email:
To: This email address is being protected from spambots. You need JavaScript enabled to view it.
Cc:
This email address is being protected from spambots. You need JavaScript enabled to view it.

Page 1 of 4